Hausa Forex Trading Course is LIVE: Know more
Menu
Hausa Forex Trading Course is LIVE: Know more
Our D-SNC-DY-00 valid study guide is edited by out IT professional experts and focus on providing you with the most updated study material for all of you. You will pass your D-SNC-DY-00 actual test in your first attempt. With the help of EMC D-SNC-DY-00 Current Exam Content, you will be more confident and positive to face your coming test. After you get your D-SNC-DY-00 certification, you will be getting close to your dream.
One failure makes many candidates fall into despair, become unconfident or even someone want to give up testing for IT certification. Now D-SNC-DY-00 reliable practice exam online will help you out. It covers most real test questions and will assist you to clear exam certainly. You will be confident in your test. D-SNC-DY-00 reliable practice exam online will be an important choice for your EMC certification. Sometimes choice is greater than effort.
>> Valid Dumps EMC D-SNC-DY-00 Book <<
You can make your dream of passing the EMC D-SNC-DY-00 exam come true with PassReview updated EMC D-SNC-DY-00 practice test questions. PassReview offer EMC D-SNC-DY-00 the latest dumps in three formats. EMC D-SNC-DY-00 desktop practice test software creates a real exam environment so that you can feel like attempting the Dell SONiC Deploy Exam D-SNC-DY-00 actual exam.
NEW QUESTION # 19
Use the simulator to perform the following configuration task.
1. Map a single-tagged CVLAN 100 to SVLAN 200 translation on PE
switch interface Eth1/1.
2. Map a double-tagged VLAN packet with an outer CVLAN 100 and an
inner dot1q 200 to SVLAN 300 translation on PE switch interface
Eth1/2.
The necessary VLANs and VLAN stacking have already been configured.
Answer:
Explanation:
see the explanation for all step by step solution with all explanation.
Explanation:
Here are the steps to configure the required VLAN translations on a Dell SONiC switch:
* Map a Single-Tagged CVLAN 100 to SVLAN 200 on Interface Eth1/1:
sonic# configure terminal
sonic(config)# interface Ethernet1/1
sonic(config-if-Ethernet1/1)# switchport mode trunk
sonic(config-if-Ethernet1/1)# switchport vlan mapping 100 200
sonic(config-if-Ethernet1/1)# end
sonic# write memory
* Map a Double-Tagged VLAN Packet with Outer CVLAN 100 and Inner dot1q 200 to SVLAN 300 on Interface Eth1/2:
sonic# configure terminal
sonic(config)# interface Ethernet1/2
sonic(config-if-Ethernet1/2)# switchport mode trunk
sonic(config-if-Ethernet1/2)# switchport vlan mapping 100 200 300
sonic(config-if-Ethernet1/2)# end
sonic# write memory
Comprehensive Detailed Step by Step Explanation with References:
* Enter Configuration Mode:
* Access the global configuration mode using the configure terminal command.
* Configure Interface Eth1/1:
* Enter interface configuration mode for Ethernet1/1 using the command interface Ethernet1/1.
* Set the switchport mode to trunk with the command switchport mode trunk.
* Configure the VLAN translation using the switchport vlan mapping 100 200 command, which maps CVLAN 100 to SVLAN 200.
* Exit the interface configuration mode by typing end.
* Save the configuration with write memory.
* Configure Interface Eth1/2:
* Enter interface configuration mode for Ethernet1/2 using the command interface Ethernet1/2.
* Set the switchport mode to trunk with the command switchport mode trunk.
* Configure the double-tagged VLAN translation using the switchport vlan mapping 100 200 300 command, which maps packets with outer CVLAN 100 and inner dot1q 200 to SVLAN 300.
* Exit the interface configuration mode by typing end.
* Save the configuration with write memory.
References:
* Dell Technologies Networking - SONiC
* Dell Enterprise SONiC Deployment Guide
These steps provide a comprehensive guide to configure VLAN translations on a Dell SONiC switch, ensuring that the specific requirements for single-tagged and double-tagged VLAN mappings are met.
NEW QUESTION # 20
Configure a VRF called "VrfGreen" and the static route in it to network 172.16.128.64/28 through next-hop
10.10.10.1. Set an administrative distance of 213.
Answer:
Explanation:
see the explanation for all step by step solution with all explanation.
Explanation:
Here are the steps to configure the VRF and the static route:
* Enter Configuration Mode:
sonic# configure terminal
* Create VRF "VrfGreen":
sonic(config)# ip vrf VrfGreen
* Configure the Static Route:
sonic(config)# ip route vrf VrfGreen 172.16.128.64/28 10.10.10.1 213
* Save Configuration:
sonic# write memory
Comprehensive Detailed Step by Step Explanation with References:
* Enter Configuration Mode:
* Begin by entering the global configuration mode to make changes to the switch configuration.
* Create VRF "VrfGreen":
* Use the command ip vrf VrfGreen to create a new VRF named "VrfGreen". This command sets up a new VRF instance which will isolate the routing table for this VRF from the global routing table and other VRFs.
* Configure the Static Route:
* Use the command ip route vrf VrfGreen 172.16.128.64/28 10.10.10.1 213 to configure the static route.
* ip route vrf VrfGreen specifies that the route should be added to the "VrfGreen" VRF.
* 172.16.128.64/28 is the destination network.
* 10.10.10.1 is the next-hop IP address.
* 213 is the administrative distance, which in this case is set to a non-default value to influence route preference.
* Save Configuration:
* Save the configuration to ensure the changes persist after a reboot using the write memory command.
References:
* Dell Technologies Networking - SONiC
* Dell Enterprise SONiC Deployment Guide
These steps provide a comprehensive guide to configure a VRF and a static route within that VRF on a SONiC-based switch, ensuring the specific requirements for routing and administrative distance are met.
NEW QUESTION # 21
What does the show vian command display?
Answer: A
Explanation:
The show vlan command displays all configured VLANs on the device, including their status, ports, and other relevant details. It does not limit the display to only active VLANs or all possible VLANs but shows those that are currently configured.
References:
* Dell Technologies SONiC Command Reference Guide
* Dell Networking Configuration Guide
NEW QUESTION # 22
Refer to the exhibit.
Eth 1/1 of SONiC-1 and Eth1/56 of SONiC-2 should be a routed link connecting the two Enterprise SONiC switches. No traffic is passing between them.
What is the cause of the failure?
Answer: B
Explanation:
From the exhibit, it is evident that Eth1/56 on SONiC-2 is assigned a link-local IPv6 address (fe80::e7d:8aff:fecb
/64). Link-local addresses are not routable beyond the local network segment, which means they cannot be used to route traffic between SONiC-1 and SONiC-2. For routed links, global unicast addresses must be used.
References:
* Dell Technologies SONiC documentation
* IPv6 Addressing Guide
NEW QUESTION # 23
What are two characteristics of route maps in Enterprise SONIC?
Answer: A,C
Explanation:
Route maps in Enterprise SONIC are used for controlling and modifying routing information. They contain a series of commands with matching criteria and actions. The permit or deny clause within route maps determines whether the matching routes are permitted or denied from being redistributed.
References:
* Dell Technologies SONiC Route Map Configuration Guide
* Dell Networking Configuration Guide
NEW QUESTION # 24
......
We should admit that gaining the D-SNC-DY-00 test certification will bring your some benefits. You may get a good opportunity in the job interview due to your EMC D-SNC-DY-00 exam certification. You may have a promotion in your present job and get a considerable salary. So, no matter how difficult it is, many IT candidates still choose to take the D-SNC-DY-00 exam test. PassReview EMC latest practice exam test may contribute to your D-SNC-DY-00 Exam Preparation. We have three different versions for you to choose, the PDF, PC Test Engine, Online Test Engine. You can choose the proper version according to your actual condition. EMC D-SNC-DY-00 exam torrents are valid and useful which can ensure you 100% pass in the actual test.
D-SNC-DY-00 Study Group: https://www.passreview.com/D-SNC-DY-00_exam-braindumps.html
PassReview regularly updates D-SNC-DY-00 practice exam material to ensure that it keeps in line with the test, These actual D-SNC-DY-00 questions assist students in discovering areas in which they need improvement, boost confidence, and lower anxiety, If you intend to take the EMC D-SNC-DY-00 exam to open doors to high-paying jobs, you need an authentic EMC D-SNC-DY-00 practice exam material to get a passing score on the first attempt, As long as you spare one or two hours a day to study with our latest D-SNC-DY-00 quiz prep, we assure that you will have a good command of the relevant knowledge before taking the D-SNC-DY-00 exam.
The Wide-Angle Difference, The processor's set of registers are, of course, the closest storage devices, PassReview regularly updates D-SNC-DY-00 Practice Exam material to ensure that it keeps in line with the test.
These actual D-SNC-DY-00 questions assist students in discovering areas in which they need improvement, boost confidence, and lower anxiety, If you intend to take the EMC D-SNC-DY-00 exam to open doors to high-paying jobs, you need an authentic EMC D-SNC-DY-00 practice exam material to get a passing score on the first attempt.
As long as you spare one or two hours a day to study with our latest D-SNC-DY-00 quiz prep, we assure that you will have a good command of the relevant knowledge before taking the D-SNC-DY-00 exam.
CIT is a qualifying exam for the Cisco Certified Network Professional CCNP?
Learning knows no limits. Here’s to your journey of seamless learning. Pick your preferred course from the list of paid & free resources..